UNIDENTIFIED

SERIAL/PARALLEL INTERFACE CARD

Card Type          Multi I/O card
Chipset/Controller Unidentified
I/O Options        Parallel port, serial ports (2)
Maximum DRAM       N/A

[Image]

                            CONNECTIONS

        Purpose          Location         Purpose          Location

  Serial port 2            J1       Parallel port            J3

  Serial port 1            J2

                         SERIAL PORT CONFIGURATION

         Port 1 (J2)                  SW1/1                  SW1/3

  »            COM1                     On                    Off

               COM2                    Off                    On

             Disabled                  Off                    Off

                         SERIAL PORT CONFIGURATION

         Port 2 (J1)                  SW1/1                  SW1/3

  »            COM1                     On                    Off

               COM2                    Off                    On

             Disabled                  Off                    Off

                        PARALLEL PORT CONFIGURATION

          Port                LPT            SW1/2             JP2

  »        Enabled             1              On            Pins 2 & 3
                                                              closed

          Disabled             2              Off           Pins 1 & 2
                                                              closed

                       COM PORT CHANGE CONFIGURATION

                 Port                                  JP1

  »                Normal                    Pins 1 & 2, 4 & 5 closed

                   Change                    Pins 2 & 3, 5 & 6 closed

       Note: This jumper should be changed from the "Normal" setting if
       LPT is enabled. When JP1 is in "Change", COM1 and COM2 are
       reversed.

  FACTORY CONFIGURED - DO NOT ALTER

      Switch            Position

       SW1/4               N/A